NANO(1) July 2017 NANO(1)
version 2.8.6
NAME
nano - Nano's ANOther editor, an enhanced free Pico clone
SYNOPSIS
nano [options] [[+line[,column
DESCRIPTION
nano is a small and friendly editor. It copies the look and feel of
Pico, but is free software, and implements several features that Pico
lacks, such as: opening multiple files, scrolling per line, undo/redo,
syntax coloring, line numbering, and soft-wrapping overlong lines.
When giving a filename on the command line, the cursor can be put on a
specific line by adding the line number with a plus sign (+) before
the filename, and even in a specific column by adding it with a comma.
As a special case: if instead of a filename a dash (-) is given, nano
will read data from standard input.
EDITING
Entering text and moving around in a file is straightforward: typing
the letters and using the normal cursor movement keys. Commands are
entered by using the Control (^) and the Alt or Meta (M-) keys.
Typing ^K deletes the current line and puts it in the cutbuffer.
Consecutive ^Ks will put all deleted lines together in the cutbuffer.
Any cursor movement or executing any other command will cause the next
^K to overwrite the cutbuffer. A ^U will paste the current contents
of the cutbuffer at the current cursor position.
When a more precise piece of text needs to be cut or copied, one can
mark its start with ^6, move the cursor to its end (the marked text
will be highlighted), and then use ^K to cut it, or M-6 to copy it to
the cutbuffer. One can also save the marked text to a file with ^O,
or spell check it with ^T.
Since nano-2.7.0, text can also be selected by holding Shift and
moving the cursor with the arrow keys. Holding down the Alt key too
will increase the stride.
The two lines at the bottom of the screen show some important
commands; the built-in help (^G) lists all the available ones. The
default key bindings can be changed via the .nanorc file -- see
nanorc(5).
OPTIONS
-A, --smarthome
Make the Home key smarter. When Home is pressed anywhere but at
- 1 - Formatted: October 27, 2025
NANO(1) July 2017 NANO(1)
version 2.8.6
the very beginning of non-whitespace characters on a line, the
cursor will jump to that beginning (either forwards or
backwards). If the cursor is already at that position, it will
jump to the true beginning of the line.
-B, --backup
When saving a file, back up the previous version of it, using the
current filename suffixed with a tilde (~).
-C directory, --backupdir=directory
Make and keep not just one backup file, but make and keep a
uniquely numbered one every time a file is saved -- when backups
are enabled (-B). The uniquely numbered files are stored in the
specified directory.
-D, --boldtext
Use bold text instead of reverse video text.
-E, --tabstospaces
Convert typed tabs to spaces.
-F, --multibuffer
Read a file into a new buffer by default.
-G, --locking
Use vim-style file locking when editing files.
-H, --historylog
Log search and replace strings to ~/.nano/search_history, so they
can be retrieved in later sessions.
-I, --ignorercfiles
Don't look at the system's nanorc nor at ~/.nanorc.
-K, --rebindkeypad
Interpret the numeric keypad keys so that they all work properly.
You should only need to use this option if they don't, as mouse
support won't work properly with this option enabled.
-L, --nonewlines
Don't add newlines to the ends of files.
-N, --noconvert
Disable automatic conversion of files from DOS/Mac format.
-O, --morespace
Use the blank line below the title bar as extra editing space.
-P, --positionlog
For the 200 most recent files, log the last position of the
cursor, and place it at that position again upon reopening such a
- 2 - Formatted: October 27, 2025
NANO(1) July 2017 NANO(1)
version 2.8.6
file. (The old form of this option, --poslog, is deprecated.)
-Q characters,
Set the quoting string for justifying. The default is
"^([ \t]*[#:>\|}])+" if extended regular expression support is
available, or "> " otherwise. Note that \t stands for a Tab.
-R, --restricted
Restricted mode: don't read or write to any file not specified on
the command line; don't read any nanorc files nor history files;
don't allow suspending nor spell checking; don't allow a file to
be appended to, prepended to, or saved under a different name if
it already has one; and don't use backup files. This restricted
mode is also accessible by invoking nano with any name beginning
with 'r' (e.g. "rnano").
-S, --smooth
Use smooth scrolling: text will scroll line-by-line, instead of
the usual chunk-by-chunk behavior.
-T number, --tabsize=number
Set the size (width) of a tab to number columns. The value of
number must be greater than 0. The default value is 8.
-U, --quickblank
Do quick status-bar blanking: status-bar messages will disappear
after 1 keystroke instead of 25. Note that option -c
(--constantshow) overrides this.
-V, --version
Show the current version number and exit.
-W, --wordbounds
Detect word boundaries differently by treating punctuation
characters as part of a word.
-X characters,
Specify which other characters (besides the normal alphanumeric
ones) should be considered as part of a word. This overrides
option -W (--wordbounds).
-Y name, --syntax=name
Specify the name of the syntax highlighting to use from among the
ones defined in the nanorc files.
-a, --atblanks
When doing soft line wrapping, wrap lines at whitespace instead
of always at the edge of the screen.
-c, --constantshow
Constantly show the cursor position on the status bar. Note that
- 3 - Formatted: October 27, 2025
NANO(1) July 2017 NANO(1)
version 2.8.6
this overrides option -U (--quickblank).
-d, --rebinddelete
Interpret the Delete key differently so that both Backspace and
Delete work properly. You should only need to use this option if
Backspace acts like Delete on your system.
-g, --showcursor
Make the cursor visible in the file browser, putting it on the
highlighted item. Useful for braille users.
-h, --help
Show a summary of the available command-line options and exit.
-i, --autoindent
Indent new lines to the previous line's indentation. Useful when
editing source code.
-k, --cutfromcursor
Make the 'Cut Text' command (normally ^K) cut from the current
cursor position to the end of the line, instead of cutting the
entire line.
-l, --linenumbers
Display line numbers to the left of the text area.
-m, --mouse
Enable mouse support, if available for your system. When
enabled, mouse clicks can be used to place the cursor, set the
mark (with a double click), and execute shortcuts. The mouse
will work in the X Window System, and on the console when gpm is
running. Text can still be selected through dragging by holding
down the Shift key.
-n, --noread
Treat any name given on the command line as a new file. This
allows nano to write to named pipes: it will start with a blank
buffer, and will write to the pipe when the user saves the
"file". This way nano can be used as an editor in combination
with for instance gpg without having to write sensitive data to
disk first.
-o directory, --operatingdir=directory
Set the operating directory. This makes nano set up something
similar to a chroot.
-p, --preserve
Preserve the XON and XOFF sequences (^Q and ^S) so they will be
caught by the terminal.
- 4 - Formatted: October 27, 2025
NANO(1) July 2017 NANO(1)
version 2.8.6
-q, --quiet
Do not report errors in the nanorc files nor ask them to be
acknowledged by pressing Enter at startup.
-r number, --fill=number
Hard-wrap lines at column number. If this value is 0 or less,
wrapping will occur at the width of the screen less number
columns, allowing the wrap point to vary along with the width of
the screen if the screen is resized. The default value is -8.
This option conflicts with -w (--nowrap) -- the last one given
takes effect.
-s program, --speller=program
Use this alternative spell checker command.
-t, --tempfile
Save a changed buffer without prompting (when exiting with ^X).
-u, --unix
Save a file by default in Unix format. This overrides nano's
default behavior of saving a file in the format that it had.
(This option has no effect when you also use --noconvert.)
-v, --view
Just view the file and disallow editing: read-only mode.
-w, --nowrap
Disable the hard-wrapping of long lines. This option conflicts
with -r (--fill) -- the last one given takes effect.
-x, --nohelp
Don't show the two help lines at the bottom of the screen.
-z, --suspend
Enable the suspend ability.
-$, --softwrap
Enable 'soft wrapping'. This will make nano attempt to display
the entire contents of any line, even if it is longer than the
screen width, by continuing it over multiple screen lines. Since
'$' normally refers to a variable in the Unix shell, you should
specify this option last when using other options (e.g. 'nano
-wS$') or pass it separately (e.g. 'nano -wS -$').
-b, -e, -f,
Ignored, for compatibility with Pico.
TOGGLES
Several of the above options can be switched on and off also while
nano is running. For example, M-L toggles the hard-wrapping of long
- 5 - Formatted: October 27, 2025
NANO(1) July 2017 NANO(1)
version 2.8.6
lines, M-$ toggles soft-wrapping, M-# toggles line numbers, M-M
toggles the mouse, M-I auto-indentation, and M-X the help lines. See
at the end of the ^G help text for a complete list.
INITIALIZATION FILE
nano will read initialization files in the following order: the
system's nanorc (if it exists), and then the user's ~/.nanorc (if it
exists). Please see nanorc(5) for more information on the possible
contents of those files.
NOTES
If no alternative spell checker command is specified on the command
line nor in one of the nanorc files, nano will check the SPELL
environment variable for one.
In some cases nano will try to dump the buffer into an emergency file.
This will happen mainly if nano receives a SIGHUP or SIGTERM or runs
out of memory. It will write the buffer into a file named nano.save
if the buffer didn't have a name already, or will add a ".save" suffix
to the current filename. If an emergency file with that name already
exists in the current directory, it will add ".save" plus a number
(e.g. ".save.1") to the current filename in order to make it unique.
In multibuffer mode, nano will write all the open buffers to their
respective emergency files.
BUGS
Justifications (^J) and reindentations (M-{ and M-}) are not yet
covered by the general undo system. So after a justification that is
not immediately undone, or after any reindentation, earlier edits
cannot be undone any more. The workaround is, of course, to exit
without saving.
Please report any other bugs that you encounter via:
https://savannah.gnu.org/bugs/?group=nano.
HOMEPAGE
https://nano-editor.org/
SEE ALSO
nanorc(5)
/usr/share/doc/nano/ (or equivalent on your system)
AUTHOR
Chris Allegretta and others (see the files AUTHORS and THANKS for
- 6 - Formatted: October 27, 2025
NANO(1) July 2017 NANO(1)
version 2.8.6
details). This manual page was originally written by Jordi Mallach
for the Debian system (but may be used by others).
- 7 - Formatted: October 27, 2025
