packages icon



 XARGS(1)                                                           XARGS(1)




 NAME
      xargs - build and execute command lines from standard input

 SYNOPSIS
      xargs [options] [command [initial-arguments]]

 DESCRIPTION
      This manual page documents the GNU version of xargs.  xargs reads
      items from the standard input, delimited by blanks (which can be pro-
      tected with double or single quotes or a backslash) or newlines, and
      executes the command (default is /bin/echo) one or more times with any
      initial-arguments followed by items read from standard input.  Blank
      lines on the standard input are ignored.

      The command line for command is built up until it reaches a system-
      defined limit (unless the -n and -L options are used).  The specified
      command will be invoked as many times as necessary to use up the list
      of input items.  In general, there will be many fewer invocations of
      command than there were items in the input.  This will normally have
      significant performance benefits.  Some commands can usefully be exe-
      cuted in parallel too; see the -P option.

      Because Unix filenames can contain blanks and newlines, this default
      behaviour is often problematic; filenames containing blanks and/or
      newlines are incorrectly processed by xargs.  In these situations it
      is better to use the -0 option, which prevents such problems.   When
      using this option you will need to ensure that the program which pro-
      duces the input for xargs also uses a null character as a separator.
      If that program is GNU find for example, the -print0 option does this
      for you.

      If any invocation of the command exits with a status of 255, xargs
      will stop immediately without reading any further input.  An error
      message is issued on stderr when this happens.

 OPTIONS
      -0, --null
           Input items are terminated by a null character instead of by whi-
           tespace, and the quotes and backslash are not special (every
           character is taken literally).  Disables the end of file string,
           which is treated like any other argument.  Useful when input
           items might contain white space, quote marks, or backslashes.
           The GNU find -print0 option produces input suitable for this
           mode.


      -a file, --arg-file=file
           Read items from file instead of standard input.  If you use this
           option, stdin remains unchanged when commands are run.  Other-
           wise, stdin is redirected from /dev/null.




                                    - 1 -       Formatted:  January 26, 2021






 XARGS(1)                                                           XARGS(1)




      --delimiter=delim, -d delim
           Input items are terminated by the specified character.  The
           specified delimiter may be a single character, a C-style charac-
           ter escape such as \n, or an octal or hexadecimal escape code.
           Octal and hexadecimal escape codes are understood as for the
           printf command.   Multibyte characters are not supported.  When
           processing the input, quotes and backslash are not special; every
           character in the input is taken literally.  The -d option dis-
           ables any end-of-file string, which is treated like any other ar-
           gument.  You can use this option when the input consists of sim-
           ply newline-separated items, although it is almost always better
           to design your program to use --null where this is possible.


      -E eof-str
           Set the end of file string to eof-str.  If the end of file string
           occurs as a line of input, the rest of the input is ignored.  If
           neither -E nor -e is used, no end of file string is used.

      -e[eof-str], --eof[=eof-str]
           This option is a synonym for the -E option.  Use -E instead, be-
           cause it is POSIX compliant while this option is not.  If eof-str
           is omitted, there is no end of file string.  If neither -E nor -e
           is used, no end of file string is used.

      -I replace-str
           Replace occurrences of replace-str in the initial-arguments with
           names read from standard input.  Also, unquoted blanks do not
           terminate input items; instead the separator is the newline char-
           acter.  Implies -x and -L 1.

      -i[replace-str], --replace[=replace-str]
           This option is a synonym for -Ireplace-str if replace-str is
           specified.  If the replace-str argument is missing, the effect is
           the same as -I{}.  This option is deprecated; use -I instead.

      -L max-lines
           Use at most max-lines nonblank input lines per command line.
           Trailing blanks cause an input line to be logically continued on
           the next input line.  Implies -x.

      -l[max-lines], --max-lines[=max-lines]
           Synonym for the -L option.  Unlike -L, the max-lines argument is
           optional.  If max-lines is not specified, it defaults to one.
           The -l option is deprecated since the POSIX standard specifies -L
           instead.

      -n max-args, --max-args=max-args
           Use at most max-args arguments per command line.  Fewer than
           max-args arguments will be used if the size (see the -s option)
           is exceeded, unless the -x option is given, in which case xargs



                                    - 2 -       Formatted:  January 26, 2021






 XARGS(1)                                                           XARGS(1)




           will exit.

      -P max-procs, --max-procs=max-procs
           Run up to max-procs processes at a time; the default is 1.  If
           max-procs is 0, xargs will run as many processes as possible at a
           time.  Use the -n option or the -L option with -P; otherwise
           chances are that only one exec will be done.  While xargs is run-
           ning, you can send its process a SIGUSR1 signal to increase the
           number of commands to run simultaneously, or a SIGUSR2 to de-
           crease the number.  You cannot increase it above an
           implementation-defined limit (which is shown with --show-limits).
           You cannot decrease it below 1.  xargs never terminates its com-
           mands; when asked to decrease, it merely waits for more than one
           existing command to terminate before starting another.

           Please note that it is up to the called processes to properly
           manage parallel access to shared resources.  For example, if more
           than one of them tries to print to stdout, the output will be
           produced in an indeterminate order (and very likely mixed up) un-
           less the processes collaborate in some way to prevent this.  Us-
           ing some kind of locking scheme is one way to prevent such prob-
           lems.  In general, using a locking scheme will help ensure
           correct output but reduce performance.  If you don't want to
           tolerate the performance difference, simply arrange for each pro-
           cess to produce a separate output file (or otherwise use separate
           resources).

      -o, --open-tty
           Reopen stdin as /dev/tty in the child process before executing
           the command.  This is useful if you want xargs to run an interac-
           tive application.

      -p, --interactive
           Prompt the user about whether to run each command line and read a
           line from the terminal.  Only run the command line if the
           response starts with `y' or `Y'.  Implies -t.

      --process-slot-var=name
           Set the environment variable name to a unique value in each run-
           ning child process.  Values are reused once child processes exit.
           This can be used in a rudimentary load distribution scheme, for
           example.

      -r, --no-run-if-empty
           If the standard input does not contain any nonblanks, do not run
           the command.  Normally, the command is run once even if there is
           no input.  This option is a GNU extension.

      -s max-chars, --max-chars=max-chars
           Use at most max-chars characters per command line, including the
           command and initial-arguments and the terminating nulls at the



                                    - 3 -       Formatted:  January 26, 2021






 XARGS(1)                                                           XARGS(1)




           ends of the argument strings.  The largest allowed value is
           system-dependent, and is calculated as the argument length limit
           for exec, less the size of your environment, less 2048 bytes of
           headroom.  If this value is more than 128KiB, 128Kib is used as
           the default value; otherwise, the default value is the maximum.
           1KiB is 1024 bytes.  xargs automatically adapts to tighter con-
           straints.

      --show-limits
           Display the limits on the command-line length which are imposed
           by the operating system, xargs' choice of buffer size and the -s
           option.  Pipe the input from /dev/null (and perhaps specify --
           no-run-if-empty) if you don't want xargs to do anything.

      -t, --verbose
           Print the command line on the standard error output before exe-
           cuting it.

      -x, --exit
           Exit if the size (see the -s option) is exceeded.

      --help
           Print a summary of the options to xargs and exit.

      --version
           Print the version number of xargs and exit.

      The options --max-lines (-L, -l), --replace (-I, -i) and --max-args
      (-n) are mutually exclusive. If some of them are specified at the same
      time, then xargs will generally use the option specified last on the
      command line, i.e., it will reset the value of the offending option
      (given before) to its default value.  Additionally, xargs will issue a
      warning diagnostic on stderr.  The exception to this rule is that the
      special max-args value 1 ('-n1') is ignored after the --replace option
      and its aliases -I and -i, because it would not actually conflict.


 EXAMPLES
      find /tmp -name core -type f

      Find files named core in or below the directory /tmp and delete them.
      Note that this will work incorrectly if there are any filenames con-
      taining newlines or spaces.

      find /tmp -name core -type f

      Find files named core in or below the directory /tmp and delete them,
      processing filenames in such a way that file or directory names con-
      taining spaces or newlines are correctly handled.





                                    - 4 -       Formatted:  January 26, 2021






 XARGS(1)                                                           XARGS(1)




      find /tmp -depth -name core -type

      Find files named core in or below the directory /tmp and delete them,
      but more efficiently than in the previous example (because we avoid
      the need to use fork(2) and exec(2) to launch rm and we don't need the
      extra xargs process).


      cut -d: -f1 < /etc/passwd |

      Generates a compact listing of all the users on the system.

 EXIT STATUS
      xargs exits with the following status:

           0    if it succeeds

           123  if any invocation of the command exited with status 1-125

           124  if the command exited with status 255

           125  if the command is killed by a signal

           126  if the command cannot be run

           127  if the command is not found

           1    if some other error occurred.


      Exit codes greater than 128 are used by the shell to indicate that a
      program died due to a fatal signal.

 STANDARDS CONFORMANCE
      As of GNU xargs version 4.2.9, the default behaviour of xargs is not
      to have a logical end-of-file marker.  POSIX (IEEE Std 1003.1, 2004
      Edition) allows this.

      The -l and -i options appear in the 1997 version of the POSIX stan-
      dard, but do not appear in the 2004 version of the standard.  There-
      fore you should use -L and -I instead, respectively.

      The -o option is an extension to the POSIX standard for better compa-
      tibility with BSD.

      The POSIX standard allows implementations to have a limit on the size
      of arguments to the exec functions.  This limit could be as low as
      4096 bytes including the size of the environment.  For scripts to be
      portable, they must not rely on a larger value.  However, I know of no
      implementation whose actual limit is that small.  The --show-limits
      option can be used to discover the actual limits in force on the



                                    - 5 -       Formatted:  January 26, 2021






 XARGS(1)                                                           XARGS(1)




      current system.

 BUGS
      It is not possible for xargs to be used securely, since there will al-
      ways be a time gap between the production of the list of input files
      and their use in the commands that xargs issues.  If other users have
      access to the system, they can manipulate the filesystem during this
      time window to force the action of the commands xargs runs to apply to
      files that you didn't intend.  For a more detailed discussion of this
      and related problems, please refer to the ``Security Considerations''
      chapter in the findutils Texinfo documentation.  The -execdir option
      of find can often be used as a more secure alternative.

      When you use the -I option, each line read from the input is buffered
      internally.   This means that there is an upper limit on the length of
      input line that xargs will accept when used with the -I option.  To
      work around this limitation, you can use the -s option to increase the
      amount of buffer space that xargs uses, and you can also use an extra
      invocation of xargs to ensure that very long lines do not occur.  For
      example:

      somecommand | xargs -s 50000 echo

      Here, the first invocation of xargs has no input line length limit be-
      cause it doesn't use the -i option.  The second invocation of xargs
      does have such a limit, but we have ensured that it never encounters a
      line which is longer than it can handle.   This is not an ideal solu-
      tion.  Instead, the -i option should not impose a line length limit,
      which is why this discussion appears in the BUGS section.  The problem
      doesn't occur with the output of find(1) because it emits just one
      filename per line.

 REPORTING BUGS
      GNU findutils online help:
      <https://www.gnu.org/software/findutils/#get-help>
      Report any translation bugs to <https://translationproject.org/team/>

      Report any other issue via the form at the GNU Savannah bug tracker:
           <https://savannah.gnu.org/bugs/?group=findutils>
      General topics about the GNU findutils package are discussed at the
      bug-findutils mailing list:
           <https://lists.gnu.org/mailman/listinfo/bug-findutils>

 COPYRIGHT
      Copyright c 1990-2021 Free Software Foundation, Inc.  License GPLv3+:
      GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>.
      This is free software: you are free to change and redistribute it.
      There is NO WARRANTY, to the extent permitted by law.

 SEE ALSO
      find(1), kill(1), locate(1), updatedb(1), fork(2), execvp(3), lo-



                                    - 6 -       Formatted:  January 26, 2021






 XARGS(1)                                                           XARGS(1)




      catedb(5), signal(7)

      Full documentation <https://www.gnu.org/software/findutils/xargs>
      or available locally via: info xargs


















































                                    - 7 -       Formatted:  January 26, 2021